Tuesday, 26 May 2026

ASME B16.9 Buttweld Elbows: Specifications, Materials, and Excellence

 In the high-stakes world of industrial piping, the ASME B16.9 Butt-Weld Elbow is more than just a directional change—it is a critical pressure-containing component. For inventory distributors and project engineers, understanding the nuances between Long Radius (LR) and Short Radius (SR) elbows, material grades, and dimensional tolerances is the key to ensuring system integrity and supply chain efficiency.

At RAYOUNG, we prioritize precision engineering and compliant documentation. This guide breaks down everything a professional buyer needs to know about sourcing ASME B16.9 elbows.

What is the ASME B16.9 Standard?

The ASME B16.9 standard covers factory-made wrought buttwelding fittings. Unlike cast fittings, wrought fittings are manufactured through forging or forming processes (such as the mandrel method or cold forming), ensuring superior grain structure and pressure ratings.

Key Types of B16.9 Elbows

  1. 90° Long Radius (LR) Elbow: The industry standard. The radius of curvature is 1.5 times the nominal pipe size (1.5D). It offers the best balance between flow resistance and space efficiency.
  2. 90° Short Radius (SR) Elbow: The radius is equal to the pipe size (1.0D). These are reserved for tight-space applications but come with higher pressure drops and turbulence.
  3. 45° LR Elbow: Used for gradual directional changes.
  4. 180° Returns: Often used in heat exchangers and coil systems.
ASME B16.9 Buttweld Elbows supplier=

Material Selection: Matching Grade to Application

The performance of an elbow is only as good as its metallurgy. For B2B buyers, carrying the right mix of carbon, stainless, and alloy steel is vital for local market demand.

Material GroupCommon Grades (ASTM)Typical Applications
Carbon SteelA234 WPB, WPCOil & Gas, Water treatment, General steam service.
Low-Temp Carbon SteelA420 WPL6Arctic environments, Cryogenic gas processing.
Stainless SteelA403 WP304L, WP316LFood processing, Chemical plants, Marine environments.
High-Yield SteelA860 WPHY 52, 60, 70High-pressure cross-country pipelines (API 5L).
Alloy SteelA234 WP11, WP22, WP91High-temperature power generation, Refineries.

ASME B16.9 LR 90° Elbow Dimensional

To assist with project planning and warehouse verification, the following table outlines the standard dimensions for Long Radius 90-degree elbows.

Note: For WNRF flange pairing, ensure the schedule (Wall Thickness) of the elbow matches the pipe schedule to maintain a smooth internal transition.

Nominal Pipe Size (NPS)Outside Diameter (OD) mmCenter-to-End (mm)Approximate Weight (Sch 40) kg
1″33.4380.40
2″60.3761.60
3″88.91144.30
4″114.31528.00
6″168.322920.5
8″219.130545.0
10″273.038179.0
12″323.8457118.0

(Weights are theoretical and may vary slightly based on manufacturer tolerances.)

180°Elbow Dimensions

Nominal SizeOutside Diameter at Bevel                     Center to Center                            Back to Face
180                                                                                        Returns
    DNNPSODOK
LRSRLRSR
15 1/221.376 48 
20 3/426.776 51 
251    33.476515641
321 1/442.295647052
401 1/248.3114768362
502    60.315210210681
652 1/273.0190127132100
803    88.9229152159121
903 1/2101.6267178184140
1004    114.3305203210159
1255141.3381254262197
1506168.3457305313237
2008219.1610406414313
25010273.0762508518391
30012323.8914609619467
35014355.61067711711533
40016406.41219813813610
45018457.01372914914686
50020508.0152410161016762
55022559.0167611181118838
60024610.018291219121991

Quality Control: The Distributor’s Checklist

When sourcing for stock or large-scale projects, price is only one factor. A reliable B2B partner like HB Steel ensures every fitting passes a rigorous inspection protocol:

  1. Dimensional Consistency: Verification of OD, ID, and wall thickness (Schedule) at the bevel ends to ensure perfect alignment during welding.
  2. Bevel End Finish: Standard 37.5-degree bevels must be clean and free of burrs to facilitate automated or manual welding.
  3. Heat Number Traceability: Every single elbow must be hard-stamped with its heat number, correlating directly to the MTC (Mill Test Certificate) EN 10204 3.1.
  4. Surface Treatment: Carbon steel fittings should be black-painted, varnished, or shot-blasted to prevent oxidation during sea transit and warehouse storage.

Why Partner with RAYOUNG for Butt-Weld Fittings?

For distributors, stock availability and logistics are the lifeblood of the business. HB Steel bridges the gap between high-volume manufacturing and precision delivery.

  • Comprehensive Range: From standard A234 WPB to specialized 904L stainless steel and Duplex grades.
  • Export-Grade Packaging: We utilize reinforced wooden cases with internal plastic wrapping to ensure your goods arrive without surface scratches or corrosion.
  • Documentation Support: Full transparency with MTCs, packing lists, and Certificates of Origin to expedite customs and satisfy end-user audits.

Ready to optimize your inventory?
If you are looking for a reliable supplier of ASME B16.9 elbows and other butt-weld fittings, contact the RAYOUNG sales team today for a technical consultation or a competitive quotation.

+86-18003119682
info@hb-steel.com

Tuesday, 12 May 2026

Raised Face Flanges

 Technology brief:

ASME B16.5 Raised Face Flanges

Materia:
ASTM / ASME A/SA 105 ASTM / ASME A 350, ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706

Size:
1/2″ (15 NB) to 48″ (1200NB) or custom


A Raised Face (RF) flange is the most common type of pipe flange used in process industries, featuring a small, elevated surface (or “raised face”) around the pipe bore above the bolt circle. This design concentrates bolt pressure onto a smaller gasket area, creating a stronger, tighter seal compared to flat-faced flanges.

Dimensions ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Size1/2″ (15 NB) to 48″ (1200NB)
Class150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
DINDIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673
BSBS4504 , BS4504, BS1560, BS10
Coating/Surface TreatmentAntirust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Flange Face TypeFlate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Value Added ServicesCNC Machining, Customised Flanges

 

Standard Specification for Raised Face Flanges

 

Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Size : 1/2″ (15 NB) to 48″ (1200NB)
Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
Flange Face Type: Flat Face (FF), Raised Face (RF)

Material & Grades of Raised Face Flanges :

 

Carbon Steel Raised Face Flanges :
ASTM / ASME A/SA 105 ASTM / ASME A 350, ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706

Stainless Steel Raised Face Flanges :
ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L

Low Temperature Carbon Steel Raised Face Flanges:  ASTM A350, LF2, LF3

Alloy Steel Raised Face Flanges :
ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91

Key Characteristics and Uses Design:

The sealing face is raised above the bolting circle plane by roughly 1/16 inch for lower pressure classes and 1/4 inch for higher classes.
Purpose: The raised surface creates higher pressure on the gasket, increasing the sealing strength and pressure containment capability.
Applications: Widely used in oil & gas, petrochemical, water and sewage, and power generation industries for piping systems, valves, and equipment.
Gaskets: Suitable for use with flat ring sheet gaskets, spiral wound gaskets, and double-jacketed gaskets.
Standards: Defined by ASME B16.5 and ASME B16.47 standards

Raised Face vs. Other

  • FacesFlat Face (FF): Typically used for lower-pressure applications (like cast iron) where the entire face is flat, requiring a full-face gasket.
  • Ring Type Joint (RTJ): Specifically for high-pressure, severe, or high-temperature applications where a metal ring is used as a seal, sometimes utilizing a specially machined groove within a raised face.

Raised Face Flanges vs Flat Face Pipe Flange

Raised Face Flange Pressure Ratings

Flanges pressure rating in psig for Raised Face Flange ASME
Temperature (F°)150#300#400#600#900#1500#2500#
-20 to 1002857409851480222037056170
2002606809051360203533955655
3002306558701310196532705450
4002006358451265190031705280
5001706058051205181030155025
6001405707551135170528404730
6501255507301100165027454575
7001105307101060159026554425
750955056751015152025354230
80080410550825123520553430
8506532042564095515952655
9005023030546069011501915
950351351852754106851145
10002085115170255430715

Cooperate with Rayoung, you will enjoy the following benefits.

Rayoung–A leading Butt Weld pipe fittings, flanges and steel pipes supplier& factory in China.
We’re here to help with your industry pipe fittings and flange needs. Rayoung has been in the business of industrial pipe fittings since 1983, and we’re confident we can help you find a solution more quickly, affordably, and with greater expertise than the competition

API 5L Seamless Steel Pipe (Line Pipe)

  API 5L Seamless Line Pipe High-Pressure Energy Transmission Solution Grades: Gr.B, X42, X46, X52, X56, X60, X65, X70 Standards: API Spec...