Tuesday, 12 May 2026

Raised Face Flanges

 Technology brief:

ASME B16.5 Raised Face Flanges

Materia:
ASTM / ASME A/SA 105 ASTM / ASME A 350, ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706

Size:
1/2″ (15 NB) to 48″ (1200NB) or custom


A Raised Face (RF) flange is the most common type of pipe flange used in process industries, featuring a small, elevated surface (or “raised face”) around the pipe bore above the bolt circle. This design concentrates bolt pressure onto a smaller gasket area, creating a stronger, tighter seal compared to flat-faced flanges.

Dimensions ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Size1/2″ (15 NB) to 48″ (1200NB)
Class150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
DINDIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673
BSBS4504 , BS4504, BS1560, BS10
Coating/Surface TreatmentAntirust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Flange Face TypeFlate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Value Added ServicesCNC Machining, Customised Flanges

 

Standard Specification for Raised Face Flanges

 

Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Size : 1/2″ (15 NB) to 48″ (1200NB)
Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
Flange Face Type: Flat Face (FF), Raised Face (RF)

Material & Grades of Raised Face Flanges :

 

Carbon Steel Raised Face Flanges :
ASTM / ASME A/SA 105 ASTM / ASME A 350, ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706

Stainless Steel Raised Face Flanges :
ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L

Low Temperature Carbon Steel Raised Face Flanges:  ASTM A350, LF2, LF3

Alloy Steel Raised Face Flanges :
ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91

Key Characteristics and Uses Design:

The sealing face is raised above the bolting circle plane by roughly 1/16 inch for lower pressure classes and 1/4 inch for higher classes.
Purpose: The raised surface creates higher pressure on the gasket, increasing the sealing strength and pressure containment capability.
Applications: Widely used in oil & gas, petrochemical, water and sewage, and power generation industries for piping systems, valves, and equipment.
Gaskets: Suitable for use with flat ring sheet gaskets, spiral wound gaskets, and double-jacketed gaskets.
Standards: Defined by ASME B16.5 and ASME B16.47 standards

Raised Face vs. Other

  • FacesFlat Face (FF): Typically used for lower-pressure applications (like cast iron) where the entire face is flat, requiring a full-face gasket.
  • Ring Type Joint (RTJ): Specifically for high-pressure, severe, or high-temperature applications where a metal ring is used as a seal, sometimes utilizing a specially machined groove within a raised face.

Raised Face Flanges vs Flat Face Pipe Flange

Raised Face Flange Pressure Ratings

Flanges pressure rating in psig for Raised Face Flange ASME
Temperature (F°)150#300#400#600#900#1500#2500#
-20 to 1002857409851480222037056170
2002606809051360203533955655
3002306558701310196532705450
4002006358451265190031705280
5001706058051205181030155025
6001405707551135170528404730
6501255507301100165027454575
7001105307101060159026554425
750955056751015152025354230
80080410550825123520553430
8506532042564095515952655
9005023030546069011501915
950351351852754106851145
10002085115170255430715

Cooperate with Rayoung, you will enjoy the following benefits.

Rayoung–A leading Butt Weld pipe fittings, flanges and steel pipes supplier& factory in China.
We’re here to help with your industry pipe fittings and flange needs. Rayoung has been in the business of industrial pipe fittings since 1983, and we’re confident we can help you find a solution more quickly, affordably, and with greater expertise than the competition

No comments:

Post a Comment

API 5L Seamless Steel Pipe (Line Pipe)

  API 5L Seamless Line Pipe High-Pressure Energy Transmission Solution Grades: Gr.B, X42, X46, X52, X56, X60, X65, X70 Standards: API Spec...